sf@worldcantwait.org
. See below for step by step instructions.
We recommend you do a couple of run-throughs, just outside your back door to make sure you have everything and that everything you have works together.
Under no circumstances, never, ever, DO NOT RUN A GENERATOR INDOORS!!!
Overview
You’ll need the following 5 items:
1) Power source
a) This can be a very loooooong extension cord plugged into an “available” electrical outlet, or
b) A gas-powered generator rated at 1,000 watts, minimum. Local hardware rental shops have them for $30-$50/day, and yeah, not very eco-conscious. Or,
c) An inverter — again, rated at 1,000 watts minimum — hooked up to any good fully-charged 12 volt car, or RV battery.
2) DVD player, or laptop with a DVD drive
3) Projector
a) If it puts out at least 1,000 lumens and you can put it on a card table, it’s good enough!
4) Sound system (hey, you gotta hear the soundtrack!)
a) A good, loud boombox is quite sufficient and simple,IFit has an AUX input — usually two jacks, L is white and R is red, or
b) A compact stereo system, IF is has an AUX input. Some people have karaoke units that have an AUX input, or
c) A car’s sound system, IF it has an iPod/mp3 player input — usually a mini-stereo plug
5) Screen
a) A light-colored wall
b) A king-sized white bed sheet
c) A portable movie/video screen
And of course, you’ll need a handful of the proper connecting cords, and a good power-strip helps simplify things . . .
Let’s put our system together:
Set up your card table/portable table, or even your tall step-ladder. Tape down the legs, if possible.
Place the DVD player on the table, plug it into the power-strip
Place the projector on the DVD player, plug it into the power-strip
Place the boombox, or your compact stereo on the table, plug it into the power-strip
Video:
Connect the video output from the DVD player to the video input on the back of the projector. The cable that comes with most DVD players has three colored RCA plugs on both ends. Simply connect a yellow plug into the yellow jack on the DVD player. Connect the other yellow plug into the yellow jack on the back of the projector. Don’t worry about the dangling red and white plugs. If you’re using a PC laptop, the standard computer monitor cable that connects a desktop PC with its display monitor will easily do the same when connected to the laptop’s display port and to the standard computer port on the back of most projectors. If you’re using a Mac, then you’ll need an adaptor for your specific Mac laptop and what’s on the back of your specific projector. If you live near an Apple store, or an independent Mac dealer, they’ll be more than happy to show you what you need.
Audio:
Connect the audio outs from the DVD player to your boombox or compact stereo. You’ll need an RCA-type stereo patch cord. They have a red plug (for R) and a white plug (for L) on each end. If you have an extra yellow-red-white type patch cord, that’s fine also. Take the red and the white plugs on one end and plug them into the red and white jacks on the back of the DVD player. Take the red and white plugs on the other end of the patch cord and plug them into the AUX input of your boombox, or compact stereo. If you’re using a home stereo/speaker set up, then any inputs labeled “CD”, “DAT”, or “TAPE IN” will do just as well. Don’t use the “PHONO” input if there is one, it’ll only give you a badly distorted sound. If you’re using a laptop, you’ll need a long version of what’s become known as the “iPod cord” — stereo mini plug on one end, a red (R) and a white (L) pair of RCA plugs on the other. The stereo mini plug goes into the headphone jack of the laptop, and red and white RCA plugs go into the red and white AUX IN jacks of your sound system.
Screen:
Set it up, if you have one. Rig up your sheet, if that’s what you’re using
Power:
If you’re using an inverter, plug your power-strip into an outlet on the inverter. Connect the inverter to your fully-charged car battery, by making sure you have the red wire clipped to the positive (+) battery post, and then by making sure you have the black wire clipped to the negative (-) battery post. Turn on the inverter, turn on your power-strip, then turn on yourDVD player,yourprojector, and then yoursound system(select AUX input).
If you’re using a generator, plug your power-strip into an outlet on the generator. Make sure it has fuel and oil. Pull the crank and start it up. Turn on your power-strip, then turn on yourDVD player,yourprojector, and then yoursound system(select AUX input). Note: You will probably want to run an electrical extension cord of about 20 feet between the generator and your power strip in order to minimize the noise from getting in the way of the many conversations you will be having . . .make sure your generator doesn’t walk off!
Focus:
Adjust and focus your lens, then adjust your sound levels . . . you’re now a certified Street-Side Showings player!
Powering down:
One should always power down in the reverse order from powering up . . .
Turn your sound all the way down. Turn off the sound system. Turn off the projector. Turn off the DVD player, or laptop.
Recharge your battery
if you’re using an inverter
Refill your gas tank
if you’re using your own generator, otherwise, return it to the rental yard in a timely manner, so that you don’t get dinged for an extra day.
VERY IMPORTANT NOTE:
Projector bulbs are delicate and expensive to replace. Let yours cool down at least 5-10 minutes before packing things up.
Questions?The SFBay Area Chapter has become experts in how to do this. Contact:
sf@worldcantwait.org